Posts Tagged ‘birthday party’
With a name like Leia, you know I couldn’t resist throwing a Star Wars themed first birthday party…heavy emphasis on Princess Leia. You can see the birthday invitation here. I made Leia funfetti cupcakes that were decorated with cream cheese and chocolate frosting, mini chocolate chips, chocolate Oreos, and red decorating gel. The oreos are held on with a dab of chocolate frosting. I displayed the cupcakes on the tower I made (instructions here). I plan on recovering the tower and adding new ribbon for my older daughter’s Disney Princess birthday in May…here we go again! At least I have 6 weeks to
recover get things ready for Hannah’s party.
I decorated the kitchen by displaying photos from each month of Leia’s first year clipped onto a piece of light pink sheer fabric. The funny story about this fabric is that it was originally purchased and used at my wedding reception almost 7 years ago. Little did I know then what that part of the decor would be used for later on 🙂 I had a bunch of silver hair clips that I used to clip the photos onto the fabric–just trying to use what I had. I couldn’t find a star wars table cloth that looked girly enough so I just bought a plain pink one and attached star wars graphics I printed out on photo paper as well as some photos of Leia with her Princess Leia hair buns on.
I made a “one” pennant decoration for Leia’s high chair. It also had “Leia” on one side pennant and “Danielle” on the other end pennant. I strung them through light pink ribbon and attached it to the high chair with glue dots. The glue dots peeled right off afterwards.
I decorated the blank wall that Leia was going to be sitting in front of to open her gifts with a big poster of photos my cousin Candace took after Leia was first born. You can see part of this in the collage above. This made a pretty backdrop and was also fun to look back on (thanks Candace!).
- Yoda Soda (pictured in collage above)–it’s actually just 7-Up and Lime Sherbet but it’s really tasty!
- Han Solo Ham Sandwiches (I made homemade yeast rolls, filled them with shaved ham and cheddar cheese, then popped them in the oven to warm 30 minutes before lunch time)
- Princess Lays Chips (I can hear your groaning)
- Yoda Ears (edamame in shells topped with coarse kosher salt)
- Vader Veggies & Droid Dip (my mom supplied this with fresh veggies from her garden and delicious spinach artichoke dip–even the spinach was from her garden!)
- Light sabers (pretzel rods dipped in raspberry sherbet flavored candy melts then sprinkled with hot pink sugar crystals; I stuck the “sabers” into a bowl filled with pink candied popcorn Hannah and I made)
- Princess Leia cupcakes
So now you have some ideas to plan your own girly star wars party–come on, there has to be someone out there that can use this! Also, a big thank you to our friend Bryan Alston who took such great party pictures for us and many of the ones I featured in the collage above. It was a really fun day and I’ll cherish the memories of Leia’s 1st birthday forever!
The cupcake tower I started making this week for two upcoming birthdays is now complete! This is how I started this project. If you’d like to make your own cupcake tower, it is super easy. Here’s what you’ll need:
- Cardboard cut into circles of 3 different sizes (I used empty diaper boxes to make me feel better about all that $ spent on diapers)
- Paper to cover the cardboard (I used 12 x 12 scrapbook paper from Michael’s)
- 2 canned good items covered in paper
- hot glue
- glue dots (optional but this made putting the scrapbook paper onto the cardboard really easy)
You’ll need two circles of cardboard for each tier. I traced the lid of my cake saver for the bottom tier (largest) and that measured about 13.5″ in diameter. I traced the lid of a large dinner plate (about 11″) for my second tier and a salad plate for the top tier (9″). There is no magic number these cardboard circles need to measure–they just need to go from largest to smallest as you go up the tower.
Glue the same size circles together so your tiers will be sturdy. Trace the cardboard circle onto your paper so you’ll have the right size of paper to cover your cardboard. I took my ribbon and hot glued it around the edge of the cardboard circles. Then I wrapped paper around my canned good and glued them onto my finished cardboard covered tiers. Ta dah!
Linked up at All Things With Purpose.
Both of my girls are going to have cupcakes at their birthday parties (Leia in April and Hannah in May). I do not own one of those fancy cupcake stands but thought, hey, I could probably make one but first I need to figure out how by looking at…you know it…pinterest.
The blog I found that I thought had the best system for making one was Annie’s Eats in her post, How to Make a Cupcake Tower. The picture I posted above is just the start of mine but I am so excited about how it is looking (and the fact that I am using empty diaper boxes to make it)! Might as well use the diaper boxes, I paid enough for em’.
I just cut my diaper boxes into usable flat sheets of cardboard and then cut the circles out of that. I traced the lid of my cake saver container for the largest tier and one of my small dinner plates for the smallest tier. You need two circles for each tier since you need two circles glued together to make a stable enough “shelf” for the cupcakes.
Yes, there is a jar of pickled okra separating the tiers right now but eventually I will have some wrapped cans in between and I still have to make the middle tier. What you see here are the top and bottom tiers.
I was also able to use some ribbon I already had laying around so that was nice and made the project even more affordable. The only thing I have purchased so far is the scrap book paper and it was on sale today at Michaels.
Since Leia’s birthday comes first, this one will be for hers–I will probably add some Star Wars stickers soon. After her party I plan on recovering the tiers with other paper and replacing the ribbon with Disney Princess ribbon I bought today at Michaels since that is the theme of her party.
This has been super easy so far and I will post more instructions when I have a finished product!